News

Maintenance and modification of condenser in automobile air conditioning system
  • Automotive

1. maintenance proposals for unconverted vehicles. Replace the elongated condenser. If the cooling system of the original car does not accumulate, it will not affect the engine heat dissipation, because the efficiency of the radiator is far beyond the engine heat dissipation. If the temperature is too high or too low, it usually has the control of the cooling fan of the tank, the clogging of the scale accumulation, the burning of the cylinder mattress, the bad heat exchanger and so on. Not loud, 9 more than 9 of the condenser was originally installed in the tank, pay attention to the modification of the lengthened condenser engine cooling temperature problem, do not need to choke. . The cooling of the water tank and the modification of the fan circuit of the condenser. When the air-conditioner is opened, the water tank is cooled and the condenser fan works together. When the air-conditioner is hot, only the water cooling fan operates. When cooling the cooling fan, the cooling fan is forced to run. The water temperature will be lower when the speed is slow or the idle speed is lower than that of the original. Although the thickening type is better, the probability of the money white flower is big. . Clean the cold gas pipeline and replace the storage tank. Choosing proper viscosity and high quality refrigerant oil can reduce the original air conditioner temperature 2~5 degrees. This project is recommended to be implemented. . The adjustable cold switch is adapted to adjust the outlet temperature manually. This project can be selectively implemented. . This project is not recommended, because the heat dissipation efficiency of the elongated condenser is far beyond the heat absorption efficiency of the evaporator, and the effect is not obvious. 2. maintenance proposals for restructured vehicles. Replace the elongated condenser. . The cooling of the water tank and the modification of the fan circuit of the condenser. If the engine affects heat dissipation, refit the thickened cooling water tank; if the heat dissipation is better, refit the lengthened cooling water tank and modify the cooling of the tank and the condenser fan line to operate together. . The engine's heat dissipation is further strengthened, and the enhanced tank cooling and condenser fans are retrofitted. . Clean the cold gas pipeline and replace the storage tank. Choosing proper viscosity and high quality refrigerant oil can reduce the original air conditioner temperature 2~5 degrees. This project is recommended to be implemented. . The adjustable cold switch is adapted to adjust the outlet temperature manually. This project can be selectively implemented.