News

Setting method of limit switch for Nissan Teana driver's side glass lifter
  • Automotive

If any of the following work is performed, the driver's side glass lift limit switch is set up (integrated in the glass elevator motor): remove or install the glass lift assembly; remove or install the glass elevator motor from the glass elevator; adjust the lift position of the glass elevator; install a new one. Glass lifter glass; replaced glass guide glass guide. The setting methods are as follows: (1) the glass lifting device is removed from the glass lift assembly; (2) the glass elevator motor is removed from the glass elevator; (3) the car's wire harness is connected to the glass elevator motor, and then the glass elevator motor is rotated at least 5 circles in the direction of the glass rising. (4) the glass elevator motor is installed on the glass elevator; (5) the glass elevator is installed to the glass elevator assembly; (6) the glass elevator assembly is installed on the door plate, and then the door glass is installed; (7) the glass is raised to the top position.

  • client borgwarner
  • client federal-mogul
  • client magal
  • client torfors
  • client setrab
  • client drayton